logo
Good price  online

products details

Home > Products >
Return Bend
>
ASTM A403 WP321H / 1.4878 Stainless Steel Return Bend 180 Degree Elbow for Heater Coils

ASTM A403 WP321H / 1.4878 Stainless Steel Return Bend 180 Degree Elbow for Heater Coils

Brand Name: YUHONG
Model Number: ASTM A403 WP321H Stainless Steel Return Bend
MOQ: 1PC
Packaging Details: Ply-wooden Case / pallet
Payment Terms: L/C,T/T
Detail Information
Place of Origin:
CHINA
Certification:
ABS, GL, DNV, NK, PED, AD2000, GOST9941-81, CCS, ISO 9001-2008
Product Name:
Return Bend
Standard:
ASTM A403, ASME SA403
Material:
WP321H, UNS S32109, 1.4878
OD:
1/2" To 48"
WT:
SCH 10S To SCH XXS
Shape:
Return Bend, 180 Degree Bend
End:
Beveled End
Highlight:
ASTM A403 WP321H Stainless Steel Return Bend, 180 Degree Return Bend Elbow
Product Description

ASTM A403 WP321H / UNS S32109 / DIN 1.4878 Stainless Steel Return Bend 180 Degree Elbow 



This is a wrought austenitic stainless steel 180° return bend (also called a U-bend or hairpin bend) made to ASTM A403 / ASME SA403 grade WP321H, the titanium-stabilised 321H grade corresponding to UNS S32109, DIN 1.4878 and JIS SUS 321H. It reverses a pipe run through a true 180° turn, so two parallel legs are joined by one fitting instead of two 90° elbows plus a nipple. The grade choice is deliberate: the titanium addition locks up carbon as TiC, which keeps chromium in solution and holds off intergranular corrosion and sigma-type embrittlement when the part is welded and then held at 425–815 °C for years — exactly the duty cycle of a heater, steam coil or heat-exchanger hairpin. It answers three recurring field problems at once: weld-zone sensitisation on the return leg, thermal-expansion stress that would otherwise load the tubesheet, and leak paths created by two extra welded joints. Supply is from 1/2″ to 48″ OD, SCH 10S to SCH XXS wall, beveled to suit butt welding, and each lot can ship with PMI, dimensional and hydrostatic test records so the fitting can be released straight into your quality file on arrival.



Compliance notes for engineering and procurement.

1. Fitting dimensions can be produced to ASME B16.9 for the equivalent elbow envelope or to customer drawings when a specific center-to-center (C–C) dimension is required — C–C is the governing dimension for a return bend and must always be stated on the inquiry.
2. Butt-weld end preparation is normally beveled and can follow ASME B16.25 by agreement.
3. Material traceability: heat numbers stencilled on the body and repeated on the mill test certificate (EN 10204 3.1, 3.2 on request), so the bend can be traced back to the mother pipe or plate heat.
4. Where the end user works under a notified body, third-party inspection (ABS, GL, DNV, NK, CCS) and PED / AD2000 documentation can be arranged before shipment.



Equivalent Grades of ASTM A403 WP321H DIN 1.4878 Stainless Steel Bend 180 Degree Return Bend Elbow

STANDARD WERKSTOFF NR. UNS JIS BS
SS 321H 1.4878 S32109 SUS 321H X12CrNiTi18-9



Chemical Composition % of ASTM A403 WP321H DIN 1.4878 Stainless Steel Bend 180 Degree Return Bend Elbow

Grade C Mn Si P S Cr N Ni Ti
SS 321H 0.04 – 0.10 2.0 max 1.0 max 0.045 max 0.030 max 17.00 – 19.00 0.10 max 9.00 – 12.00 4(C+N) – 0.70 max



Mechanical Properties of ASTM A403 WP321H DIN 1.4878 Stainless Steel Bend 180 Degree Return Bend Elbow

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1457 °C (2650 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %


Frequently Asked Questions

Why a 180° return bend instead of two 90° elbows?

One fitting instead of three parts, two welds instead of four, and no short nipple to align. The trade-off is slightly higher pressure drop than two long-radius 90° elbows, which is normally irrelevant in a coil where the return leg is not the controlling resistance.

321H or 316Ti or 304H — which one do I need?

321H and 316Ti are both stabilised, but 321H is the choice for elevated-temperature strength up to about 815 °C; 316Ti adds molybdenum and is the better answer when chlorides or reducing acids are present. 304H has the carbon for creep strength but no stabiliser, so weld-zone sensitisation must be accepted or avoided by heat treatment.

Can you match a specific center-to-center dimension?

Yes. Send the C–C distance, leg length, angle and end preparation; the bend is produced to your drawing rather than to a catalogue envelope, and the drawing number is printed on the MTC.

Application

Where a 321H return bend belongs

1. Heaters and hairpin heat exchangers. The return leg closes a U-tube bundle so the bundle can grow and shrink axially without pushing on the tubesheet — the single most common reason to specify a 180° bend rather than two elbows.
2. Steam and hot-oil coils in tanks. Long serpentine coils built from return bends keep the header count low and put weld seams outside the highest-temperature zone.
3.Compact skid-mounted piping. Two parallel lines can be turned at the skid edge in one fitting, saving a spool piece and two girth welds in a space where radiography access is poor.
4. Process lines with thermal cycling. 321H is chosen where the pipe is welded, stress relieved imperfectly, and then cycled in the 500–800 °C band.


ASTM A403 WP321H / 1.4878 Stainless Steel Return Bend 180 Degree Elbow for Heater Coils