| Brand Name: | YUHONG |
| Model Number: | N/A |
| MOQ: | 500kgs |
| Price: | To be discussed |
| Packaging Details: | Plywood case or Iron frame wooden case |
| Payment Terms: | L/C,T/T |
Wound finned tubes for air cooler condensers, manufactured with ASME SA179 low-carbon steel seamless tubes, are designed to improve heat-transfer efficiency in air-cooled heat exchangers and industrial cooling systems.
These finned tubes consist of a seamless cold-drawn carbon steel base tube with metallic fins helically wound around its external surface. The wound fin structure significantly increases the effective heat-transfer area, allowing air to remove heat from the process fluid flowing inside the tube more efficiently.
ASME SA179 (ASTM A179) is a widely used material specification for seamless cold-drawn low-carbon steel heat-exchanger and condenser tubes. It offers good thermal conductivity, suitable mechanical properties, and excellent formability for heat-exchanger manufacturing.
Our wound finned tubes are manufactured using controlled fin-winding processes to achieve consistent fin spacing, secure mechanical attachment, and accurate dimensional tolerances. Different fin configurations and materials can be selected according to operating conditions and customer requirements.
These products are suitable for air-cooled condensers, air-cooled heat exchangers (ACHE), industrial cooling equipment, petrochemical plants, refineries, and power generation facilities.
Product Name: Wound Finned Tubes for Air Cooler Condensers
Base Tube Material: ASME SA179 / ASTM A179
Material Type: Seamless cold-drawn low-carbon steel
Fin Configuration: Helically wound fins
Fin Attachment: Tension-wound, L-foot, LL-foot, KL-foot, or other specified mechanical winding designs
Main Application: Air-cooled condensers and industrial air-cooled heat exchangers
Helically wound fins provide a significantly larger external heat-transfer surface than bare tubes, improving the heat exchange between the process fluid and cooling air.
The winding process ensures consistent fin positioning and mechanical contact with the base tube. Different winding configurations can be selected according to operating temperature and service conditions.
ASME SA179 seamless carbon steel provides good thermal conductivity, mechanical strength, and workability for heat-exchanger and condenser applications.
Depending on the application, fins can be manufactured from aluminum, copper, carbon steel, or other specified materials. Aluminum fins are commonly selected for air-cooled heat exchangers because of their high thermal conductivity and relatively low weight.
Tube diameter, wall thickness, fin height, fin pitch, fin thickness, and tube length can be manufactured according to customer drawings and engineering requirements.
The increased external surface area helps improve heat-transfer capacity while supporting compact equipment design and efficient utilization of cooling air.
Wound finned tubes manufactured with ASME SA179 base tubes are widely used in the following industries:
|
Application |
Main Function |
|---|---|
|
Air-cooled condensers |
Condenses process steam or vapor through air cooling |
|
Air-cooled heat exchangers |
Transfers heat from process fluids to atmospheric air |
|
Petrochemical plants |
Cools process fluids and hydrocarbon streams |
|
Oil refineries |
Supports process cooling and heat-recovery systems |
|
Natural gas processing |
Cools gas and associated process streams |
|
Power plants |
Used in selected air-cooled condenser and cooling systems |
|
Industrial cooling systems |
Provides efficient air-side heat exchange |
The following table presents typical commercial manufacturing dimensions for wound finned tubes used in air cooler condensers.
|
Parameter |
Typical Size Range |
|---|---|
|
Base tube outside diameter |
19.05–50.8 mm |
|
Base tube wall thickness |
1.65–5.0 mm |
|
Tube length |
3,000–18,000 mm |
|
Fin height |
9.5–25.4 mm |
|
Fin thickness |
0.3–0.8 mm |
|
Fin pitch |
2.0–8.0 mm |
|
Fin material |
Aluminum 1060, 3003, copper, carbon steel |
|
Base tube material |
ASME SA179 / ASTM A179 |
|
Fin type |
L-foot, LL-foot, KL-foot, or other specified wound fin |
|
Fin arrangement |
Helical |
|
Manufacturing process |
Mechanical fin winding |
|
Surface treatment |
Natural finish, coating, or specified protection |
Note: These are indicative manufacturing ranges, not dimensions prescribed by ASME SA179. Actual dimensions depend on equipment design, fin-winding technology, and customer specifications.
L-Foot Wound Finned Tubes
L-foot fins are formed with an extended foot that wraps around the base tube surface. They provide mechanical contact between the fin strip and tube and are commonly used in air-cooled heat exchangers operating within suitable temperature limits.
LL-Foot Wound Finned Tubes
LL-foot fins feature overlapping foot sections that provide additional surface coverage and protection to the underlying tube. This configuration is suitable for selected applications requiring enhanced tube surface protection.
KL-Foot Wound Finned Tubes
KL-foot fins feature a knurled base tube surface into which the fin foot is mechanically secured. This design improves mechanical contact and fin retention.
Selection note: The appropriate fin configuration depends on operating temperature, vibration, corrosion conditions, thermal expansion, and required fin retention.
ASME SA179 is a low-carbon steel specification intended for seamless cold-drawn heat-exchanger and condenser tubes.
The chemical composition requirements are as follows:
|
Chemical Element |
Composition (wt.%) |
|---|---|
|
Carbon (C) |
0.06–0.18 |
|
Manganese (Mn) |
0.27–0.63 |
|
Phosphorus (P) |
≤ 0.035 |
|
Sulfur (S) |
≤ 0.035 |
These chemical limits apply to the SA179 base tube material. The fin material must comply with its own applicable material specification.
Material Characteristics:
Carbon provides the required strength and hardness characteristics.
Manganese contributes to strength and improves steel processing properties.
Phosphorus is controlled to maintain material quality and toughness.
Sulfur is limited to help maintain ductility and manufacturing quality.
The low-carbon composition makes SA179 suitable for cold drawing, bending, and various heat-exchanger fabrication processes.
The mechanical properties of ASME SA179 seamless carbon steel tubes are specified to ensure suitable strength and ductility for heat-exchanger and condenser service.
|
Mechanical Property |
Specification Requirement |
|---|---|
|
Tensile Strength |
≥ 325 MPa |
|
Yield Strength |
≥ 180 MPa |
|
Elongation (50.8 mm gauge length) |
≥ 35% |
|
Hardness (Rockwell B) |
≤ 72 HRB |
These requirements apply to the base tube, subject to the applicable specification and dimensional limitations.
The combination of strength and ductility supports tube fabrication, mechanical fin winding, and installation in air-cooled heat exchanger assemblies.
Our wound finned tubes are manufactured through a controlled production process to maintain consistent dimensions and reliable fin attachment.
Step 1 – Base Tube Material Selection
Seamless cold-drawn ASME SA179 carbon steel tubes are selected according to the required outside diameter, wall thickness, and length. Material certificates are reviewed to verify chemical composition and mechanical properties.
Step 2 – Tube Surface Preparation
The external surface of the base tube is cleaned to remove oil, dirt, loose scale, and other contaminants. Proper surface preparation helps achieve consistent fin-to-tube contact.
Step 3 – Fin Strip Preparation
Fin strips are prepared from the specified material, such as aluminum 1060 or aluminum 3003. Fin thickness, height, and profile are checked before the winding operation.
Step 4 – Mechanical Fin Winding
The fin strip is helically wound around the base tube using specialized fin-winding equipment. Depending on the selected design, L-foot, LL-foot, or KL-foot configurations are produced.
Step 5 – Fin Attachment and Adjustment
Fin tension, spacing, alignment, and contact with the tube surface are controlled to ensure consistent mechanical attachment along the full finned length.
Step 6 – Dimensional Inspection
The finished tubes are checked for fin pitch, fin height, tube diameter, overall length, straightness, and un-finned end dimensions.
Step 7 – Final Cleaning and Packaging
The finished products undergo final cleaning and inspection before protective packaging and shipment.
Quality inspection is an important part of manufacturing wound finned tubes for air-cooled condensers. Our inspection procedures can be arranged according to ASME SA179, applicable general requirements, and customer-specific specifications.
|
Inspection Method |
Inspection Purpose |
|---|---|
|
Mill Test Certificate (MTC) Review |
Verifies base tube material grade and traceability |
|
Chemical Composition Analysis |
Confirms compliance with SA179 chemical requirements |
|
Tensile Test |
Checks tensile strength, yield strength, and elongation |
|
Hardness Test |
Verifies the specified base tube hardness |
|
Dimensional Inspection |
Checks tube OD, wall thickness, fin height, pitch, and thickness |
|
Visual Inspection |
Identifies surface defects and fin-winding irregularities |
|
Fin Attachment Test |
Evaluates mechanical fin retention and attachment quality |
|
Tube Straightness Inspection |
Checks tube alignment and dimensional stability |
|
Hydrostatic Test |
Verifies pressure integrity of the base tube |
|
Eddy Current Test |
Provides nondestructive examination of suitable base tubes |
|
Final Inspection |
Confirms finished product quality and purchase-order compliance |
For air-cooled condenser applications, additional inspection requirements can include:
Fin pull-off or fin retention testing.
Fin pitch uniformity inspection.
Tube end dimensional verification.
Coating thickness inspection, where applicable.
Bundle identification and material traceability.
Inspection reports and material certificates.
Important technical distinction: ASME SA179 covers the seamless cold-drawn base tube, not the complete wound-fin assembly. Its specified tests include flattening, flaring, flange, hardness, and hydrostatic or applicable nondestructive electric testing. Mechanical fin attachment requires separately agreed inspection methods and acceptance criteria.
Our ASME SA179 wound finned tubes offer several advantages for air-cooled condenser manufacturers and industrial heat-exchanger projects.
Higher Heat-Transfer Capacity: The helical fin arrangement increases the effective air-side heat-transfer area.
Improved Cooling Performance: Larger external surface area supports more effective heat transfer from the internal process fluid to ambient air.
Lightweight Construction: Aluminum fin materials reduce the overall weight of the finned tube assembly.
Flexible Fin Design: Different fin profiles and pitches can be selected to meet specific thermal and mechanical requirements.
Good Manufacturing Adaptability: SA179 base tubes offer suitable workability for mechanical fin-winding operations.
Economical Material Selection: Low-carbon steel base tubes provide a cost-effective option for many conventional heat-exchanger applications.
Custom Engineering Solutions: Dimensions, fin materials, and winding configurations can be adjusted to meet project drawings.
To protect the wound fins and base tubes during storage and transportation, suitable packaging methods are available:
Protective plastic end caps to prevent contamination.
Bundled packaging with suitable supports.
Protective wrapping to minimize moisture exposure.
Wooden cases or export-standard packaging for overseas shipments.
Clear product identification showing material grade, dimensions, quantity, and order number.
Material test certificates and inspection documentation can be provided according to customer requirements.
For accurate quotations and technical evaluation, customers should provide the following information:
|
Item |
Required Information |
|---|---|
|
Product Name |
Wound Finned Tubes for Air Cooler Condensers |
|
Base Tube Standard |
ASME SA179 / ASTM A179 |
|
Base Tube Material |
Low-carbon steel |
|
Outside Diameter |
As per drawing |
|
Wall Thickness |
As per drawing |
|
Tube Length |
As per project requirements |
|
Fin Material |
Aluminum 1060 / 3003 or specified material |
|
Fin Height |
As per design |
|
Fin Thickness |
As per design |
|
Fin Pitch |
As per design |
|
Fin Type |
L-foot / LL-foot / KL-foot |
|
Finned Length |
As per drawing |
|
Un-finned Length |
As per drawing |
|
Quantity |
As per purchase order |
|
Inspection Requirements |
As per project specifications |
We welcome inquiries from air-cooled condenser manufacturers, EPC contractors, petrochemical companies, refinery engineering companies, and industrial heat-exchanger manufacturers worldwide.