|
| Marka Adı: | YUHONG |
| Model Numarası: | ASTM B111 UNS C44300 Dikişsiz Pirinç Boru |
| Adedi: | 500kg |
| Fiyat: | pazarlık edilebilir |
| Ödeme Şartları: | L/C,T/T |
ASTM B111 UNS C44300 / CuZn28Sn1 O61 Temper Admiralty Brass Seamless Tube
ASTM B111 C44300 is the standard specification for seamless Admiralty Brass tubes used in heat exchangers and condensers. Also known by the EN designation CuZn28Sn1, this alloy consists of approximately 70% copper, 28% zinc, and 1% tin, with a small addition of arsenic. The tin and arsenic act as inhibitors, providing excellent resistance to dezincification (selective zinc corrosion) in fresh and brackish water environments. These tubes offer a strong balance of good thermal conductivity, corrosion resistance, and ductility for easy fabrication. They are widely specified for surface condensers in power plants, marine heat exchangers, and freshwater generators, providing a cost-effective solution where resistance to general corrosion and erosion is required.
Equivalent Grades of Copper Alloys
| Material Designation | Corresponding Material Symbol | ||||
| GB/T8890 | ASTM B111 | BS2871 | JIS H3300 | DIN1785 | |
| Copper-Nickel | BFe10-1-1 | C70600 | CN102 | C7060 | CuNi10Fe1Mn |
| BFe30-1-1 | C71500 | CN107 | C7150 | CuNi30Mn1Fe | |
| (BFe30-2-2) | C71640 | CN108 | C7164 | CuNi30Fe2Mn2 | |
| (BFe5-1.5-0.5) | C70400 | – | – | – | |
| B7 | – | – | – | – | |
| Aluminums Brass | HAL77-2 | C68700 | CZ110 | C6870 | CuZn20Al2 |
| Admiralty Brass | HSn70-1 | C44300 | CZ111 | C4430 | CuZn28Sn1 |
| Boric Brass | Hsn70-18 | – | – | – | – |
| HSn70-1 AB | – | – | – | – | |
| Arsenical Brass | H68A | – | CZ126 | – | – |
| Brass Tube | H65/H63 | C28000/C27200 | CZ108 | C2800/C2700 | CuZn36/CuZn37 |
Chemical Composition of Copper Alloys
| Designation | Chemical Composition % | ||||||||
| Cu | Sn | Al | As | Ni | Fe | Mn | Pb max. | Zn | |
| C44300 | 70.0-73.0 | 0.9-1.2 | – | 0.02-0.06 | – | 0.06 max | – | 0.07 | Rem |
| C68700 | 76.0-79.0 | – | 1.8-2.5 | 0.02-0.06 | – | 0.06 max | – | 0.07 | Rem |
| C70400 | Rem | – | – | – | 4.8-6.2 | 1.3-1.7 | 0.3-0.8 | 0.05 | 1.0max |
| C70600 | Rem | – | – | – | 9.0-11.0 | 1.0-1.8 | 1.0max | 0.05 | 1.0max |
| C71500 | Rem | – | – | – | 29.0-33.0 | 0.4-1.0 | 1.0max | 0.05 | 1.0max |
| C71640 | Rem | – | – | – | 29.0-32.0 | 1.7-2.3 | 1.5-2.5 | 0.05 | 1.0max |
Tensile Requirements:
| Copper or Copper Alloy UNS NO. | Temper Designation | Tensile Strength | Yield Strength | |
| Standard | Former | min ksi | min ksi | |
| C44300 | O61 | annealed | 45 | 15 |
| C68700 | O61 | annealed | 50 | 18 |
| C70400 | H55 | light-drawn | 38 | 30 |
| C70600 | H55 | light-drawn | 45 | 15 |
| C71500 | O61 | annealed | 52 | 18 |
| C71640 | O61 | annealed | 63 | 25 |
QUICK SELECTION GUIDE
|
Choose C68700 when: Clean seawater or brackish water (open ocean quality)
|
Choose C70600 (90/10 CuNi) when: Moderate water quality (some pollution risk)
|
|
Choose C71500 (70/30 CuNi) when: Poor to moderate water quality |
Choose Titanium when: Severely polluted or sulfide-laden water |
Application
