İyi bir fiyat.  çevrimiçi

Ürün ayrıntıları

Evde > Ürünler >
Düşük kanatlı tüp
>
ASTM A334 Gr.1 Alloy Steel Integral Low Fin Tube for Enhanced Heat Transfer

ASTM A334 Gr.1 Alloy Steel Integral Low Fin Tube for Enhanced Heat Transfer

Marka Adı: Yuhong
Model Numarası: ASTM A334 GR.1
Adedi: 100kgs
Fiyat: pazarlık edilebilir
Ödeme Şartları: L/C, T/T
Tedarik Yeteneği: 1000 ton/ay
Ayrıntılı Bilgiler
Menşe yeri:
ÇİN
Sertifika:
DNV, BV, PED, LR, ABS, TS, CCS
Fin Tüp Tipi:
Düşük Fin Boruları, Entegre Fin Boruları
Başvuru:
Eşanjör, Kazan
Spesifikasyon:
ASME A334
Yüzgeç kalınlığı:
0,3 mm
Tüp tipi:
Kesintisiz
FPI:
19-27
Malzeme:
GR.1
NDT:
Ht, vb
Ambalaj bilgileri:
Plastik kapalı katlı kılıf / demir kasa / demet
Yetenek temini:
1000 ton/ay
Vurgulamak:

ASTM A334 Gr.1 alloy steel low fin tube

,

integral low fin tube for heat transfer

,

alloy steel enhanced heat transfer tube

Ürün Tanımı

ASTM A334 Gr.1 Alloy Steel Integral Low Fin Tube for Enhanced Heat Transfer

 

Description:
Integral low fin tubes are produced by cold rolling the outer surface of a seamless tube to form uniform fins directly from the base material. Since the fins are an integral part of the tube wall (not added separately), this structure ensures excellent thermal conductivity, mechanical strength, and resistance to fin detachment.
ASTM A334 Grade 1 alloy steel integral fin tubes are designed for efficient heat transfer in low-temperature and moderate-pressure applications, such as air coolers, condensers, and heat exchangers used in petrochemical and power industries.

 

Materials:

  • Base Tube: Alloy Steel ASTM A334 Grade 1 (Seamless)

Key Advantages:

  • Fins are integral with tube wall — no risk of detachment

  • Excellent thermal contact and heat transfer performance

  • Good mechanical strength and pressure resistance

  • Suitable for low-temperature applications

  • Long service life and easy maintenance

Chemical Composition of ASTM A334 Grade 1

Element C Mn P S Si
Composition (%) ≤0.30 0.40–1.06 ≤0.025 ≤0.025 ≤0.10

 

Mechanical Properties of ASTM A334 Grade 1

Value / Property Tensile Strength Yield Strength Elongation
Unit MPa MPa %
Requirement ≥ 415 ≥ 240 ≥ 30

 

Comparison Between ASTM A179 and ASTM A334 Gr.1 Low Fin Tubes

Feature / Type A179 Low Fin Tube A334 Gr.1 Low Fin Tube
Material Carbon Steel Alloy Steel
Tensile Strength (MPa) ≥ 325 ≥ 415
Temperature Range Normal to moderate temperature Low temperature service
Corrosion Resistance Standard Better
Thermal Conductivity Higher Slightly lower
Typical Use Air coolers, condensers Low-temperature heat exchangers

 

 

Applications:

  • Air Cooled Heat Exchangers

  • Condensers

  • Low-temperature Heat Exchangers

  • Petrochemical and Power Generation Equipment

ASTM A334 Gr.1 Alloy Steel Integral Low Fin Tube for Enhanced Heat Transfer 0